Product Overview
About: Banda Beat3001 1 Ohm High Power Vehicle Audio Mono Bass Amplifier
The BEAT Line is a new compact line of BAND amplifiers. Combine quality features with Class D efficiency. With 1 channel of 3000 W rms at 1 Ohm, or BEAT 3001, with burnable power reduction. Banda Audioparts created BEAT for small and medium sound projects. Thanks to its FULL RANGE of frequency response, or BEAT, it fits in any project with: Subwoofers, Woofers, Medium bass, Horns or Super Tweeters. It has high efficiency, audio quality with minimal distortion (below 1%), low current consumption in the musical signal and compact design that fits in any space of your project.
| Specifications | |
| Class | D |
| Total Power 14,4 @ 1 Ohm | 3900W RMS |
| Total Power 14,4 @ 2 Ohms | 2900W RMS |
| Total Power 12,6 @ 1 Ohm | 3000W RMS |
| Total Power 12,6 @ 2 Ohms | 2300W RMS |
| Efficiency @ 2 Ohms | 78% |
| Efficiency @ 1 Ohm | 71% |
| Input Voltage | 9 – 15V |
| Input Impedance | 100K Ohms |
| THD+Noise | <1% |
| Input Sensitivity | 110mV – 4V |
| SNR | 80dB |
| Frequency Response | 20 to 20KHz (-3dBs) |
| HPF (Subsonic) | 20 to 80Hz @ 12dB/octave Linkwitz-Riley |
| LPF (Crossover) | 80 to 20kHz @ 12dB/octave Linkwitz-Riley |
| Recommended Fuse | 150 A |
| Current at Rest | 1.5 A |
| Average Current Draw (Sinusoidal) | 360 A |
| Average Current Draw (Music) | 180 A |
| Power Wire Gauge (min. Recommended) | 21mm / 4 AWG |
| Speaker Wire Gauge (min. Recommended) | 2 x 4mm / 2 x 11 AWG |
| Weight (Lb) | 7.6 |
| Height (in) | 2.2 |
| Width (in) | 8.4 |
| Depth (in) | 9.7 |
