CT Sounds HYDRO-8 8" 300W RMS Shallow Mount Subwoofer

CT Sounds

(No reviews yet) Write a Review

Log in for pricing

SKU:
HYDRO-8
Condition:
New
Availability:
Usually Ships in 1-2 Days

Product Overview

About: CT Sounds HYDRO-8 8" 300W RMS Shallow Mount Subwoofer

CT Sounds is proud to introduce the hydro shallow mount subwoofer series after completing a rigorous R&D process spanning 2 years! Our goal was to engineer a 300-watt 8” shallow-mount subwoofer with a mounting depth below 3.5” that was suitable for both sealed & ported enclosures. To achieve this, we focused on the EBP (Efficiency Bandwidth Product). As a general rule, EBP < 50, is used only for sealed enclosures, EBP 50 - 100, is used for both, and EBP > 100, is used only for ported enclosures. EBP = FS/QES.

Our 1st prototype utilized a 50.8 mm voice coil & 30 oz magnet resulting in a high QES rating of 1.05 and low EBP of 44.1. The 2nd prototype utilized a 44.7 mm voice coil & 30 oz magnet resulting in a slightly lower QES rating of 0.843 and a slightly higher EBP of 54.8. After the 1st and 2nd prototypes, we determined a larger motor assembly was needed to provide a more controlled electrical system (lower QES). This led us to invest in a custom-tooled basket (used in the final prototype) to keep the mounting depth below 3.5”.

The 3rd and final prototype uses a 44.7 mm voice coil & 40 oz magnet resulting in a reduced QES rating of 0.577 and a balanced EBP of 80.07. In testing, we ran into mechanical noise due to the larger motor assembly and voice coil in a confined space. Therefore, we invested in a custom-tooled cone to maximize the excursion capability by creating an equal distance between the cone, spider, and bottom plate. The result is an 8” shallow-mount subwoofer that is extremely responsive in both sealed & ported enclosures.

Product Highlights:  

  • RMS Power: 300 Watts
  • MAX Power: 600 Watts
  • Voice Coil Configuration: Dual 2 Ohm (D2) or Dual 4 Ohm (D4) 
  • Use Cases: Sealed & Ported Enclosures

Specifications: 

  • Product Type: Car Subwoofer
  • Subwoofer Size: 8"
  • Voice Coil Configuration: Dual 2 Ohm (D2) or Dual 4 Ohm (D4) 
  • RMS Power: 300 Watts
  • MAX Power: 600 Watts
  • Voice Coil Type: 1.75 Inch - 4 Layer High-Temperature Copper Voice Coil
  • Magnet Type: Y35
  • Bottom Plate Type: Low Carbon Iron
  • Surround Type: Dual White Stitched Competition Mega Foam Surround
  • Cone Type: Composite Paper with 3% Carbon Fiber Reinforcement
  • Tinsel Lead Type: Single Braided Flat Copper Tinsel Leads
  • Terminal Type: 12 Gauge Push Terminals
  • Basket Type: Stamped Steel
  • Spider Material: Poly-Cotton Blend

Thiele/Small Parameters: 

  • Qes: 0.577 (D2) | 0.668 (D4) 
  • Qms: 6.549 (D2) | 6.083 (D4) 
  • Qts: 0.531 (D2) | 0.602 (D4) 
  • Fs: 46.20 Hz (D2) | 47.47 Hz (D4) 
  • Vas: 10.298 L (D2) | 10.427 L (D4) 
  • Mms: 82.895 g (D2) | 77.535 g (D4) 
  • Cms: 0.143 m/N (D2) | 0.145 m/N 
  • Re: 3.9 Ω (D2) | 6.4 Ω (D4) 
  • Bl: 12.751 Tm (D2) | 14.880 Tm (D4) 
  • Le: /
  • Sd: 227 cm² 
  • Xmax - Single Way (mm): 8 mm 
  • Xmax - Single Way (cm): 0.8 cm 
  • Vd (Sd*Xmax): 181.6 cm² 
  • SPL: 84.48 dB 

Subwoofer Measurements:

  • Cutout Diameter: 7.51"
  • Overall Diameter: 8.77"
  • Mounting Depth: 3.26"

Box Specifications:

  • Displacement: 0.02 ft3

Box Recommendations:

  • Sealed: 0.35 ft3
  • Ported: 0.875 ft3
  • Tuning Frequency: 36 Hz
  • Port Area: 14 in2

*Enclosure recommendations do not account for subwoofer, bracing, and port displacement.

Reviews

(No reviews yet) Write a Review