DS18 LSE-212A Dual 12" Bass Package with Amplifier and 4g Amp Kit

DS18

(No reviews yet) Write a Review

Log in for pricing

SKU:
LSE-212A

Product Overview

About: DS18 LSE-212A Dual 12" Bass Package with Amplifier and 4g Amp Kit

Designed exclusively to bring breathtaking bass to car audio enthusiasts like you, DS18’s LSE-212A is the key to unlocking bass you can feel! DS18’s LSE-212A Bass Package is the epitome of convenience, delivering mind-blowing bass in a single, all-inclusive package. The prefabricated box features a solid construction of 1/2 -inch MDF, ensuring optimal strength and resonance. Tuned to perfection at 35Hz, this enclosure is designed to improve your subwoofers low frequency response.

Durability is at the forefront of our design philosophy. We've engineered the LSE-212A to withstand the test of time, ensuring that you'll enjoy hard-hitting bass for years to come. With a rugged construction and high-quality materials, this bass package is built to endure the demands of your music, even under the most intense conditions. At the heart of the LSE-212A Bass Package are two of DS18’s renowned MD12.4 subwoofer. With an impressive 250W RMS Power Handling and single 4-ohm impedance voice coil, these subwoofers pack a punch well above their weight class. The MD12.4’s unparalleled cone area helps it generate deep, rich bass that will resonate through your entire vehicle. With a sensitivity of 93dB, the MD12.4’s effortlessly reproduce frequencies from 29Hz to 250Hz, for bass response that will blow you away.

Complementing the subwoofers is the S-1500.1/RD amplifier, a true Monoblock powerhouse that pushes your audio system to the next level. With 350W of RMS power output at 2 ohms and 220W at 4 ohms, this Class AB amplifier delivers clean, distortion-free sound that will satisfy even the most discerning audiophiles. The carefully calibrated gain and crossover ranges provide precise control over your bass, allowing you to fine-tune every detail of your audio experience. But that's not all. To complete this exceptional package, we've included a 4-GA Amp Kit that ensures a hassle-free installation. From the AGU Fuse Holder to the Red/Black Twisted RCA Cable, every component has been handpicked for maximum performance and durability. We've left no stone unturned to deliver an all-encompassing solution that meets and exceeds your expectations.

Product Highlights: 

  • 1 X LSE-212A
  • 1 X 1 Channel Subwoofer Amplifier
  • 1 X Amp Kit
  • RMS Power: 500 Watts
  • Ported Loaded Enclosure

Subwoofer Specifications: 

  • Nominal Diameter: 12"
  • Nominal Impedance: 4 Ohm
  • RMS Power Handling: 250W
  • MAX Power Handling: 500W
  • Sensitivity (1w/1m): 90dB
  • Frequency Response: 29-250Hz
  • Recommended HI Pass Crossover: 80Hz
  • Magnet Weight: 42 oz
  • Magnet Material: Ferrite
Box Specifications: 
  • Port Tune: 35Hz
  • Internal Volume: 90.6L
  • Load Configuration: Front Ported
  • Box Material: 1/2" MDF
  • Finish Material: Carpet
  • Measurement (L x W x H): 39" x 14" x 14"

Amplifier Specifications: 

  • Type: Monoblock Amplifier 
  • Circuit Topology: Class AB Monoblock Amplifier
  • RMS Power Output @ 2 Ohm: 350 Watts
  • RMS Power Output @ 4 Ohm: 220W
  • Total Harmonic Distortion: <.3%
  • S/N Ratio Ref 1w @ 4 Ohm: >90 db
  • Gain Range: 0.2-6V
  • Crossover Range: 50-250hz
  • Frequency Range: 20Hz-500 Hz
  • Measurement (L x W x H): 13.7" x 5.8" x 1.8"

What's in the Box: 

  • 2 x 12" SLC-MD12 Subwoofer
  • 1 x LSE-212A Dual Ported Vented Box
  • 1 x S1500.1/RD Monoblock Amplifier
  • 1 x AMPKIT4 Amplifier Installation Kit

Reviews

(No reviews yet) Write a Review