Product Overview
About: DS18 XM6LD 6-Way Active Crossover with Remote Gain Control
DS18’s XM6LD is crafted for flawless frequency distribution throughout your system, ensuring unparalleled clarity and peak efficiency for your acoustic needs. This 6-Way Active Crossover serves as the heart of your system, optimizing every aspect of your audio. With its impressive 6 separate bands and line driver options, the XM6LD allows you to elevate your input voltage, achieving a perfect match with your amplifier voltage. DS18 understands the importance of precise tuning in achieving audio excellence. That's why the XM6LD comes equipped with easy-to-use tuning controls that provide unparalleled accuracy. High pass and band pass filters allow you to effortlessly target your desired midrange and high-range frequencies, ensuring your sound reproduction is exact and tailored to your preferences.
The XM6LD's master gain knob, coupled with its six level adjustment knobs, empowers you to increase voltage via the line driver, ensuring your amplifiers receive the optimal signal voltage they crave for maximum volume. Drawing a mere 200mA of current and with a remote turn-on time of just 0.5 seconds, the XM6LD combines efficiency with speed, ensuring seamless integration into your audio setup. With an input impedance of 22K-Ohms and an input voltage range of 150mV to 6V, it accommodates a wide array of audio sources, enabling you to unleash the full potential of your music. As an esteemed member of the DS18 family, the XM6LD is meticulously designed to meet the exacting standards of car audio enthusiasts. Its dimensions of 1.5" in height, 6.5" in length, and 8.5" in width make it compact and easily installable, blending seamlessly into your system.
Product Highlights:
- Active Crossover
- 6-Way
- Front/Rear/Sub Inputs
- High/Band Pass 1,2,3/Mid-Bass/Sub Outputs
- On/Off Button for each Channel
- Bass Control Knob
Specifications:
- Total Harmonic Distortion @ 1kHz: 0.04%
- Signal to Noise Ratio: >105dB
- Stereo Separation: >70dB
- Current Drain: 200mA
- Remote Turn-on Time: 0.5 Sec
- Recommended Fuse: 1A
- Gross Single Unit Weight: 3.5 lb
- Box Dimensions (L x W x H): 14.25" x 8.5" x 2.25"
Input Impedance / Voltage:
- Front & Rear & Subwoofer: 22K-Ohms
- Input Voltage: 150mV~6V
- Crossover Cut Off Slope: 12dB/Octave
- Maximum Output Voltage: 11.5V
Subwoofer:
- Low Pass Crossover Frequency: 40~90Hz
- Subsonic Filter: 10Hz~30Hz
- Phase Shift: 0 to 180 degrees
- Bass Level Remote Control: Wired
Rear (Mid Bass/Band Bass 3):
- Mid Bass: Low Pass Crossover Frequency: 40Hz ~1KHz
- High Pass Crossover Frequency: 40Hz ~1kHz
- Low Pass Crossover Frequency: 1KHz~12KHz
Front (HIGH/Band Pass1/Band Pass2):
- High Pass Crossover Frequency: 1KHz~12KHz
- High Pass Crossover Frequency: 40Hz ~1KHz
- Low Pass Crossover Frequency: 1KHz~12KHz
