Product Overview
About: Fi Audio MT12 MT Series 12” 4500W RMS Subwoofer
Due to Popular demand the MT Series is back for good. The MT Series of Fi subwoofers is designed to meet the needs of the serious competitor and and monster basshead. With a massive 4″ voicecoil for increase thermal capacity, we designed the rest of the motor via FEA to optimize the proprietary US steel (water jet and machined in house at Fi when your order is placed). Using three ultra-high grade Y35 magnets, a flux flow derived back plate geometry, and a solid pole with aluminum sleeve and aluminum compression cap, and the famed Omega Coil, there is plenty of thermal capacity in the MT Series. Our Fi designed heavy 5 spider pack coupled with our special 144 tinsel count leadwire to keep the moving assembly under control at extreme excursion levels. The reworked surround geometry on the 12″, 15″, and 18″ models optimizes cone area vs excursion yielding the most output vs excursion. The MT Series is designed for competition use and monster daily driving systems requiring high linearity and extreme power handling. From a punishing low end to the subtle nuances in your favorite reference track, the MT Series delivers!
Thiele/Small parameters:
| Coils | D1/D2 |
| Fs | 34.3 Hz |
| Re | .75/1.49 |
| Qms | 7.93 |
| Qes | 0.38 |
| Qts | 0.37 |
| Mms | 404 g |
| Cms | 5.30 ^-5 |
| Sd | 480 cm^2 |
| Vas | 17.7 l |
| Spl | 84.6 1W/1m |
| Bl | 19.0/26.1 |
| Xmax | 33 mm |
| Rms | 4500W |
Measurements:
- Overall: 12.625"
- Cutout: 11.125"
- Mounting Depth: 9.375"
- Displacement: .19 cuft
- Sealed ft3: N/A
- Ported ft3: 1.8-2.5 cuft
