Product Overview
About: PRV Audio 6MR250A 6" Midrange Loudspeaker - 8 Ohms (Sold Individually)
The 6MR250A delivers outstanding vocal reproduction with high output. It provides extended frequency response and smooth sound with very low distortion.
PRV Audio’s Alto Series were carefully crafted and voiced to reproduce a natural, smooth sound while remaining dynamic. To get the superior fidelity, a special composite cone is built with non-pressed paper (visible on the back side) for reduced break-up, smooth frequency response and to keep the moving mass low, increasing the efficiency.
Handling up to 125 watt RMS and with 94 dB sensitivity this midrange will be right at home in any home, automotive, or professional high SPL design.
Specification:
- Nominal Diameter: 6" (152 mm)
- Nominal Impedance: 8Ω
- Rated Power Handling (RMS): 125 Watts
- Program Power: 250 Watts
- Sensitivity (1W/1m): 94 dB
- Recommended Hi Pass X-Over: 300 Hz (12 dB/Octave)
- Frequency Range at -10 dB: 150 - 9,500 Hz
- Voice Coil Diameter: 1.5" (38 mm)
- Voice Coil Wire: CCAW
- Voice Coil Winding Depth: 8.8 mm
- Former Material: Kapton
- Magnetic Gap Depth: 5.5 mm
- Frame Material: Stamped Steel
Thiele-Small Parameters:
- Equivalent Volume (Vas): 3.56
- Xmax: 3.00 mm
- Resonance Frequency (Fs): 145.30 Hz
- Mechanical Factor (Qms): 15.03
- Electrical Factor (Qes): 1.26
- Total Factor (Qts): 1.16
- Cone Area (Sd): 154 cm²
- Mechanical Mass (Mms): 11.15 g
- Bl Factor (Bl): 6.99 Tm
- Dc Resistance (Re): 6.1 Ohms
- Inductance (Le): 0.14 mH at 1 kHz
- Mechanical Mass Without Air (Mmd): 10.06 g
- Mechanical Compliance (Cms): 0.107 mm/N
Mounting and Shipping Information:
- Overall Diameter: 6.45" (164 mm)
- Front Mount Baffle Cutout: 5.59" (142 mm)
- Mounting Depth: 3.11" (79 mm)
- Overall Depth 3.34" (85 mm)
- Weight: 3.79 Lbs (1.72 kg)
