Product Overview
About: PRV Audio WG2500Py SLIM 2" Exit Compression Driver + Horn - 8 Ohm
The WG2500Py SLIM is a compact 2″ horn driver featuring a Polyimide D2500Py Pro Audio Compression Driver with a 2” exit WGP14-50X Slim Waveguide. This is a top-of-the-line horn driver designed to offer unsurpassed natural upper midrange and high frequency response at high sensitivity, with crystal clear natural sound from the Polyimide diaphragm.
The driver’s small diameter allows front mounting, making it easy to install without detaching the driver from the WGP14-50X Horn. Its design was developed to give custom doors a new solution for a shallow horn driver, its 2.5” voice coil allows it to push more power into it, increasing its output tremendously, compared to a standard 2” voice coil driver.
The specially designed Polyimide diaphragm provides durability and additional damping for natural sound quality. This technology raises the bar for high frequency drivers by giving the driver wider usable bandwidth for smooth, dynamic output along with excellent efficiency. The Polyimide diaphragms supersede titanium diaphragms, being able to play low frequencies without shattering and performing more accurately at high frequencies.
Product Highlights:
- Polyimide diaphragm with large 2.5″ Voice Coil, providing dynamic output along with excellent efficiency – 107 dB Sensitivity
- High Frequency 2″ Exit Driver + Shallow Horn WGP14-50X – Perfect as compression driver for car audio
- Crystal clear natural sound with wider response from 800 to 17,000 Hz
- PRO Audio horn driver, able to handle 200 Watts Continuous Program Power (RMS) with music
- Compact driver mounted on slim horn, ideal for tight spaces, increase sound output on your system with this slim solution. Great choice for custom car audio door panels
Specifications:
- Exit Throat Diameter: 2” (50 mm)
- Nominal impedance: 8 Ohms
- Power Handling:
- Nominal Power Handling: 100 Watts
- Continuous Program Power (RMS): 200 Watts
- Max Peak Power: 400 Watts
- Sensitivity 2.83V at 1m: 107 dB
- Recommended Hi Pass X-Over: 900 Hz (12 dB/Octave)
- Frequency Response at -10dB: 800 – 17,000 Hz
- Voice Coil Diameter: 2.5″ (63.5 mm)
- Voice Coil Wire: CCAW
- Voice Coil Former Material: Kapton
- Diaphragm Material: Polyamide
- Flux Density: 1.87 T
- Magnet Material: Ferrite
Mounting and Shipping Information
- Overall Depth: 5.77” (146.5 mm)
- Mounting Depth: 5.45” (138.5 mm)
- Overall Width: 6.14” (156 mm)
- Overall Height: 6.14” (156 mm)
- Baffle Cutout Diameter: 5.75” (146 mm)
- Weight: 7.72 lbs (3.50 kg)
Note:
- Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range.
- Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to avoid a clean signal without clipping or saturation.
- Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.
