Product Overview
About: Rockford Fosgate 20GLADR-STG5 All-In-One Audio Kit for Select 2020-2023 Jeep Gladiator JT
The Gladiator Stage 5 Jeep all-in-one audio kit was developed to take your 4×4 adventure to the next level. This 1,800 watt plug and play audio kit delivers high output performance; a jeep specific tune to ensure an epic listening experience as well as a straightforward installation. The system is designed and engineered to match and compliment your factory interior and was built Element Ready™ ensuring lasting performance no matter the terrain.
Where Sound Meets Adventure
The Jeep Gladiator Stage 5 is an all-in-one 1,800 Watt high-performance audio system that’s 4x louder than the base audio and nearly 2x louder than the premium audio system. It stands apart from the competition with its fully integrated Digital Signal Processor tuned specifically for Jeep Gladiator by Rockford Fosgate engineers using a custom designed 6-microphone array.
Performance Sound
With a total of 1,800 watts, this audio kit is equipped with two 10" subwoofers, front and overhead 6.5" coaxial speakers, front 1-inch tweeters, and both a 1,000-watt and an 800-watt amplifier that are pre-tuned. The kit also features a Digital Signal Processor with a specific Jeep tune, all to ensure the best-in-class listening experience.
Element Ready™
Purpose built for the off-road environment, Rockford’s Element Ready™ products are built to stand up to water, dirt, mud and UV rays, making sure all your audio components perform regardless of the conditions.
Plug-and-Play Design
With the Plug and Play wire harnesses, OEM style enclosures with factory connectors, and no cutting wires or plastic parts you will enjoy an easy and simple installation process.
RF3 (Rockford Factory Fit and Finish)
Designed and engineered to match and compliment the factory fit and finish of your vehicle. These components are purpose built to the exact specifications to ensure the best-in-class fitment and look.
Features:
- Up to 4x louder than base audio system
- Integrated OEM style enclosures w/ factory connectors
- High output performance
- Nearly 2x louder than premium audio system
- T-harness integration eliminates cutting or splicing wires
- Direct bolt into vehicle using OEM mounting holes
- Plug and Play design for easy installation
- Durable PE (Poly Ethylene) material with friction welded seams
- Minimal cutting (for models that require 12v accessory relocation only)
- Audio integration into OEM CAN-bus system
- DSP recognition with auto-loading Jeep Gladiator specific tune
- Custom bass level control matches OEM dash and controls
- Element Ready™ enclosures designed to withstand heat, water, and UV rays
- Thermal shock and vibration resistant enclosures
- Slim subwoofer in sealed enclosure retains cargo space
- Custom Rockford Fosgate duck
- Factory jack relocation kit
Specifications:
- Designed for 2020-up Jeep Gladiator JT
- All components are Rockford Fosgate Element Ready for water, dirt, and UV protection
- System includes:
- Front and overhead pairs of 6.5" coaxial speakers
- Front 1" tweeters
- Two 12" subwoofers
- 750-watt (RMS) and 400-watt (RMS) amplifiers
- Jeep-specific enclosures
- Jeep-tuned digital signal processor for connecting to Jeep radio
- Plug-and-play wiring harnesses, bass level control, and complete wiring kit with fuse block
TMS65 Front and Overhead Soundbar 6-1/2" Coaxial Speakers:
- Carbon fiber-reinforced polypropylene cones
- 25 mm film dome tweeters
- Santoprene speaker surrounds
- Water- and weather-resistant Element Ready design
- OEM-style Rockford Fosgate-branded enclosures for soundbar
M2-TS Front Tweeters:
- marine grade PEI rubber surround
- IPX6-rated front and grille, with IPX5-rated frame
Power T1 12" Subwoofers:
- Carbon fiber/PMI/glass fiber cone with aluminum dustcap
- Injection-molded foam surround
- Aluminum diecast frame
- OEM-style Rockford Fosgate branded enclosure
M5-1000X1 Mono Amplifier:
- 750 watts RMS x 1 at 1 ohm (1000 watts peak)
- Frequency response: 30-245 Hz
- Low-pass crossover and bass boost
- Element Ready design
M5-800X4 4-Channel Amplifier
- 100 watts x 4 at 4 ohms
- frequency response: 10-50,000 Hz
- high- and low-pass filters
- Element Ready design
Vehicle Application:
Jeep Gladiator (JT):
- Gladiator Sport: 2020 - 2023
- Gladiator Sport S: 2020 - 2023
- Gladiator Willys: 2021 - 2023
- Gladiator Willys Sport: 2021 - 2023
- Gladiator Rubicon: 2020 - 2023
- Gladiator 80th Anniversary: 2021
- Gladiator Altitude: 2020 & 2022
- Gladiator California Edition: 2021
- Gladiator FarOut: 2023
- Gladiator Freedom: 2021 & 2023
- Gladiator High Altitude: 2021 - 2023
- Gladiator Overland: 2020 - 2023
- Gladiator North Edition: 2020
- Gladiator Mojave: 2020 - 2023
- Gladiator Texas Trail: 2021 - 2023
Compatibility Notes:
- (A) Automatic Transmission: requires no special modifications.
- (M) Manual Transmission: requires removal of supplied grommet & drilling 3/4-inch hole through firewall to route power wire.
- (D) Diesel V6: requires removal of fuse-holder from bracket to mount separately on firewall.
- (D) Diesel + Tow Package: requires purchase of PLC2 remote bass control and alternate mounting location.
- (P) Premium Audio: available on this model is replaced by Rockford Fosgate audio kit.
- (V8) 6.4L V8: requires removal of fuse-holder from bracket to mount separately on firewall.
What's in the Box:
- (2) M2-TS M2 1” Dash Tweeters + Bezels
- (2) TMS65 6.5” Front Speakers + Enclosures
- (2) TMS65 6.5” Overhead Speakers + Enclosure
- (2) T1S2-10 Dual 10” Subwoofers + Enclosure
- (1) DSP + Jeep Specific Tune
- (1) M5-800X4 800 Watt Amp + Jeep Specific Tune
- (1) M5-1000X1 1,000 Watt Amp + Jeep Specific Tune
- (1) PLC2 Bass Level Control + Custom Knob
- (1) Complete Wiring Kit + Fuse block
- (1) Factory Jack Relocation Kit
- (1) 12V Relocation Kit
- (1) Rockford Fosgate Duck
