Product Overview
Product Highlights:
The PM1000X1bd is a 1000 Watt mono amplifier with high dynamic power using Class-bd technology and a conformal coated pc board designed for motorsport and marine applications.
With its super efficient Class-bd circuit topology, the PM1000X1bd assures maximum BOOM for your buck! Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers with ease.
- High level input capable with Auto Turn-On circuit
- Features C.L.E.A.N. Set-up
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- 12dB/octave Butterworth crossover
- RCA pass-thru outputs
- On-board Punch EQ with +18dB boost @ 45Hz
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
- Infrasonic filter
- Marine grade two part epoxy coating on circuit boards
- Marine grade stainless steel hardware
- 2 Year Warranty
Specifications:
- Recommended Fuse (not included)140 A
- Total Harmonic Distortion (THD+Noise)4-Ohm: <1.0%
- 2-Ohm: <1.0%
- 1-Ohm: <1.0%
- Efficiency (average)86% @ 4-Ohm
- Dynamic Power
- (PVC/PowerCube®)491 Watts x 1 @ 4-Ohms
- 874 Watts x 1 @ 2-Ohms
- 1,430 Watts x 1 @ 1-Ohm
- Shipping Weight12.9 Lbs. (5.85 Kg.)
- Suggested Alternator100 A
- CEA-2006 CompliantCEA-2006 Guidelines CEA-2006 Power Rating
- 300W x 1 @ 4ä‹_
- ≤1.0% THD+N
- Operating Voltage9 - 16 VDC
- Input Sensitivity150 mV - 12 V
- Number of Channels1
- Max. Current Draw (13.8V Sinewave)130 A
- Average Current Draw (13.8V Music)65 A
- Crossover ControlsLow-Pass (LP): 50-250Hz @ 12dB/octave Butterworth
- Infrasonic Filter (IF): 28Hz @ 12dB/Octave Butterworth
- All-Pass: No
- Rated Power
- (RMS Continuous Power)300 Watts x 1 @ 4-Ohm
- 500 Watts x 1 @ 2-Ohm
- 1000 Watts x 1 @ 1-Ohm
- Total Power
- (Sum of Rated Power)1000 Watts
- BridgeableNo
- Tone ControlsPunch EQ2 Bass: 0dB to +18dB @ 45Hz
- Signal InputHi/Low level: 1 RCA pair
- Signal OutputHi/Low level: 1 RCA pair
- Power Input ConnectorCaptive C-Clamp
- Power Wire Gauge4 AWG
- Speaker Output ConnectorCaptive C-Clamp
- Speaker Wire Gauge8 AWG to 18 AWG
- Heat Sink TypeCast aluminum
- CoolingConvection
- Remote ControlsOptional Punch Level Control (PLC2) Ready
- Visual IndicatorsPower/Protect/Thermal LED
- Input Clip LED3
- Output Clip LED1,2,3
- LED Color Legend:
- 1 BLUE: <0.5% THD
- 2VIOLET: 1% THD
- 3RED: 10%+ THD
- Circuit Topology ClassClass BD
- Frequency Response20Hz to 250Hz +/- 1.0dB
- Dimensions (H x W x D)2.38 x 7.76 x 13.28 (in)
- 6.05 x 19.71 x 33.73 (cm)
What's in the Box:
- Owner's manual
- Mono subwoofer amplifier
- 2.5mm Allen wrench
- Four 1-1/2" Self-tapping screws
- Setup disc (CD)
- Setup guide
- Certificate of Performance Verification
