Product Overview
Product Highlights:
The PM600X4 is a 600 Watt 4-channel amplifier with high dynamic power using Class-a/b technology and a conformal coated pc board designed for motorsport and marine applications.
The Punch PM600X4 multi-channel amplifier is versatile to power any audio system configuration. In addition to 4-channel stereo mode, you can bridge both channels to create a high power 2-channel amp, or run stereo speakers on the front with subwoofers on the rear in 3-channel mode. The variable HP/LP crossover and built-in Punch EQ allows for precise tuning of Bass frequencies and the Pass-Thru RCA jacks provide flexibility as your system grows and keeping Y-adapters to a minimum.
- High level input capable with Auto Turn-On circuit
- RCA pass-thru outputs
- Features C.L.E.A.N. Set-up
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost @ 45Hz
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
- Marine grade two part epoxy coating on circuit boards
- Marine grade stainless steel hardware
- 2 Year Warranty
Specifications:
- Input Sensitivity150 mV - 12 V
- Recommended Fuse (not included)100 A
- Average Current Draw (13.8V Music)45 A
- Efficiency (average)68% @ 4-Ohm
- Dynamic Power
- (PVC/PowerCube®)129 Watts x 4 @ 4-Ohms 0° Res
- 211 Watts x 4 @ 2-Ohms 0° Res
- CEA-2006 CompliantCEA-2006 Guidelines CEA-2006 Power Rating
- 75W x 4 @ 4ä‹_
- ≤1.0% THD+N
- Shipping Weight12.8 Lbs. (5.80 Kg.)
- Suggested Alternator75 A
- Crossover ControlsFront/Rear High-Pass (HP): 50Hz-250Hz @ 12dB/octave Butterworth
- Front/Rear Low-Pass (HP): 50Hz-250Hz 12dB/octave Butterworth
- All-Pass: Yes
- Number of Channels4
- Operating Voltage9 - 16 VDC
- Max. Current Draw (13.8V Sinewave)90 A
- Total Harmonic Distortion (THD+Noise)4-Ohm: <1.0%
- 2-Ohm: <1.0%
- Rated Power
- (RMS Continuous Power)75 Watts x 4 @ 4-Ohm
- 150 Watts x 4 @ 2-Ohm
- 300 Watts x 2 @ 4-Ohm Bridged
- Total Power
- (Sum of Rated Power)600 Watts
- BridgeableYes
- Tone ControlsFront Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
- Front Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
- Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
- Rear Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
- Function depends upon LP/AP/HP switch position
- Signal InputHi/Low level: 2 RCA pair
- Signal OutputLow level: 1 RCA pair
- Power Input ConnectorCaptive C-Clamp
- Power Wire Gauge4 AWG
- Speaker Output ConnectorCaptive C-Clamp
- Speaker Wire Gauge8 AWG to 18 AWG
- Heat Sink TypeCast aluminum
- CoolingConvection
- Remote ControlsOptional Punch Level Control (PLC2) Ready
- Visual IndicatorsPower/Protect/Thermal LED
- Input Clip LED3
- Output Clip LED1,2,3
- LED Color Legend:
- 1BLUE: <0.5% THD
- 2VIOLET: 1% THD
- 3RED: 10%+ THD
- Circuit Topology ClassClass A/B
- Frequency Response20Hz to 20kHz +/- 1.0dB
- Dimensions (H x W x D)2.38 x 7.76 x 13.28 (in)
- 6.05 x 19.71 x 33.73 (cm)
What's in the Box:
- Owner's manual
- 4-Channel marine amplifier
- 2.5mm Allen wrench
- Four 1-1/2" Self-tapping screws
- Setup disc (CD)
- Setup guide
- Certificate of Performance Verification
