Product Overview
About: Rockford Fosgate T400-4 Power 400 Watt 4-Channel Amplifier
The Power T400-4 is a 4-channel amplifier capable of producing 100 Watts into each of its four channels at 2-Ohms. The T400-4 can run a 4-way full-range system or use component speakers on the front with subwoofers on the rear. The T400-4 amplifier is perfect for front/rear fading stereo systems or when dedicated amplification is required between front stage speakers and rear subwoofer(s). Thanks to the Dynamic Thermal Management, the small chassis design insures it can be installed in any location – like under front seats.
Specifications:
- 4-channel car amplifier
- 60 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms)
- 200 watts RMS x 2 bridged output at 4 ohms (2-ohm stable in bridged mode)
- CEA-2006 compliant
- Dynamic Thermal Management cooling system
- Differential Input circuitry eliminates hum
- Variable high- and low-pass filters (50-500 Hz, 24 dB/octave)
- Variable bass/treble boost (0-18 dB at 45 Hz, 0-12 dB at 12k Hz)
- Optional remote bass/treble boost (available soon)
- Class-AB amplifier design
- MOSFET power and output stages
- Preamp inputs
- 4-gauge power and ground leads and a 100-amp fuse recommended — wiring and hardware not included with amplifier
- No on-board fuses — when installing multiple amps in a system, an additional 100-amp in-line fuse between the distribution block and the amplifier is recommended
- Dimensions (W x H x D): 13-5/8" x 2-1/4" x 9-5/8"
What's in the Box:
- 4-channel amplifier
- Four 1-1/2" Self-tapping screws
- Installation & Operation manual (English/ French/ Spanish/ German/ Italian)
- Punch Amplifier Performance Verification Certificate
- Optional PEQ remote EQ control information