Product Overview
About: Taramps BASS 15K 15000 Watts Class D Car Amplifier (Taramps Authorized Canadian Dealer)
The BASS 15K Amplifier Module is carefully developed with state-of-the-art technology, offering unique efficiency and performance for automotive audio systems. Intended for sub-bass and bass responses, it has a maximum power of 15.000W in a single-channel, running at a 1-ohm impedance, with frequency responses at a rate from 8Hz to 250Hz. As it has customizable features, it can be set according to the predominant frequency and to your car trunk size. Besides the BASS BOOST and the central frequency option, this product can deliver even more adjustments, such as displacement control through the subsonic filter, volume control, and low pass filter, each one contributing to a right measured bass.
Technical Information
| OPERATION CLASS | Class D |
|---|---|
| NUMBER OF CHANNELS | 01 |
| MAXIMUM POWER | @ 14,4 VDC - 1 OHM: 15000 W RMS @ 14,4 VDC - 2 OHMS: 8505 W RMS |
| INPUT SENSITIVITY | 280mV |
| SIGNAL TO NOISE RATIO | >95dB |
| FREQUENCY RESPONSE | (-3dB) 8Hz - 250Hz |
| CROSSOVER HIGH PASS (HPF) | Variable, 8 to 30Hz (-12dB/8ª) |
| CROSSOVER LOW PASS (LPF) | Variable, 60 to 250Hz (-12dB/8ª) |
| BASS BOOST | Parametric, (35 to 60Hz) 0 - 12dB |
| EFFICIENCY | 80% |
| INPUT IMPEDANCE | 22K Ohms |
| PROTECTION SYSTEM | Output Short / Short on output relative to GND / High and Low Power Supply and Thermal protection |
| MIN. SUPPLY VOLTAGE | 9VDC |
| MAXIMUM POWER SUPPLY VOLTAGE | 17VDC |
| CONSUMPTION AT REST | 400mA |
| MAXIMUM MUSIC CONSUMPTION | 17.5A |
| MAXIMUM CONSUMPTION IN SINUSOIDAL SIGNAL | 1302A |
| DIMENSIONS (H X W X D) | 9.37" x 2.79" x 21.42" |
| WEIGHT | 21.34lb |
| EAN | 7898556844116 |
- Do not mount amplifier to speaker box. Cyclic Vibrational Failure is #1 fail rate of amplifiers and these are lighter than most so their potential is higher if not followed.
- Do not wire this amplifier lower than 1ohm nominal Impedance. (Equivalent to ~0.7 ohms DCR or Resistive measurement via DMM).
- Do not clip amplifier above 15.0v for extended periods of time
- Do not drive amplifier into clipping + protection for extended periods of time (exceeding 20% THD)
