Product Overview
About: Taramps the Big Boss 5 Bass 5000W RMS Monoblock Amplifier - Taramps Authorized Canadian Dealer
THE BIG BOSS 5 BASS is much more than an amplifier; it brings together the best technology available in terms of audio and design. With 108 RGB LED effects, it elevates your sound to an incomparable level and transforms your car into an audiovisual spectacle. The high technology in its construction and automatic multi-impedance system (0.5 to 2 Ohms) makes it an extremely versatile powerhouse. Furthermore, it is a robust and resistant product, designed for exceptional performance when used with subwoofers. Has a wide range of colors and light patterns that sync perfectly to the beat of your music. The Big Boss 5 Bass is an ideal choice for those looking for power, flexibility and style in their sound system.
Technical Information
Number of Channels | 01 |
---|---|
Maximum power | Nominal Power @14.4VDC 0,5 Ohm: 5000W RMS 1 Ohm: 5000W RMS 2 Ohms: 5000W RMS 4 Ohms: 2700W RMS |
Input Sensitivity | 4V ~ 0.2V |
Signal to Noise Ratio | >90dB |
Frequency Response | 8Hz ~ 200Hz (-3dB) |
Crossover high pass (HPF) | 8Hz ~ 30Hz (-12dB/8ª) Variable |
Crossover low pass (LPF) | 60Hz ~ 200Hz (-12dB/8ª) Variable |
bass boost | Freq.: 35Hz ~ 55Hz Boost: 0 ~ +10dB |
Efficiency | 76% @ 0.5 Ohm | 80% @ 1 Ohm | 84% @ 2 Ohms |
Input Impedance | 10K Ohms |
Output Impedance | 0.5 ~ 2 Ohms |
protection system | Output short-circuit, Low/High supply voltage and Thermal protection |
Minimum Supply Voltage | 9VDC |
Maximum Supply Voltage | 17VDC |
Consumption at rest | 2.60A |
Maximum music consumption | @14.4VDC 230A @ 0.5 Ohm | 215.5A @ 1 Ohm | 210A @ 2 Ohms |
Maximum consumption in sinusoidal signal | 461A @ 0.5 Ohm | 431A @ 1 Ohm | 420A @ 2 Ohms |
Dimensions (WxHxD) | 9.37" x 2.80" x 16.81" (238 x 71 x 427 mm) |
Weight | 12,76 lb (5,80 Kg) |
EAN | 7908706600827 |
Precautions
- Do not mount amplifier to speaker box. Cyclic Vibrational Failure is #1 fail rate of amplifiers and these are lighter than most so their potential is higher if not followed.
- Do not wire this amplifier lower than 1ohm nominal Impedance. (Equivalent to ~0.7 ohms DCR or Resistive measurement via DMM).
- Do not clip amplifier above 15.0v for extended periods of time
- Do not drive amplifier into clipping + protection for extended periods of time (exceeding 20% THD)