Product Overview
About: Banda Elite 4000.4 4000 Rms 1 Ohm 4 Channels Amplifier
With a powerful 4000 Watts RMS in 4 channels and impedance of 1 or 2 Ohms per channel, the amplifiers of the new ELITE line are very versatile, allowing different types of installation with a single amplifier. Thanks to its FULL-RANGE frequency response range, the ELITE fits into any project with: Subwoofers, Woofers, Medium-Bass, Horns or Super Tweeters, making it possible to make calls in 4, 3 or 2 channels when used on Bridge connections.
With the ELITE 4000.4 it is possible to connect a medium-sized sound system completely, enjoying the audio quality already enshrined by BANDA AUDIOPARTS in addition to a low consumption.
Specifications:
- Maximum Power 14.4v @ 1 Ohms: 4 x 1200 WRMS
- Maximum Power 14.4v @ 2 Ohms: 4 x 800 WRMS
- Maximum Power 14.4v Bridge @ 2 Ohms: 2 x 2400 WRMS
- Maximum Power 12.6v @ 1 Ohms: 4 x 1000 WRMS
- Maximum Power 12.6v @ 2 Ohms: 4 x 650 WRMS
- Maximum Power 12.6v Bridge @ 2 Ohms: 2 x 2000 WRMS
- Efficiency @ 2 Ohms: 92%
- Efficiency @ 1 Ohms: 82%
- Input Voltage: 9 - 15V
- Input Impedance: 100K Ohms
- THD + N: <1%
- Input Sensitivity: 150mV - 4V
- Signal to Noise Ratio: 88dB
- Frequency Response: 5 to 22kHz (-3dBs)
- HPF (Subsonic): 20 to 90Hz @ 12dB / octave Linkwitz-Riley
- LPF (Crossover): 90 to 20kHz @ 12dB / octave Linkwitz-Riley
- Recommended fuse: 200 A
- Resting Current: 1 A
- Maximum Current (musical signal): 210 A
- Power cables (minimum recommended): 35mm / 2 AWG
- Output cables (min. Recommended): 2 x 4mm / 2 x 11 AWG
