Product Overview
About: Sundown Audio U Series 12" - 1500 Watts RMS
The Sundown U Series is our premier “standard suspension” woofer series. It is the most direct replacement for the world famous Z v.3 woofer line which we produced from 2011 to 2016 before launching the “new platform” Z v.4 series. Due to numerous advancements in our design process the U Series is able to deliver performance on-par with the Z v.3 series but at a much lower cost.
We start with a double-stacked / 8.66” wide Y35 grade ferrite magnet system coupled to a one-piece, bumped T-Yoke and a 0.6” thick top-plate. Just as with the Z v.3 before it and our other high-end subwoofers we also add a very thick (5mm thickness) aluminum shorting ring inside the magnets to reduce static inductance and level out inductance over stroke. The U series motor also features a 0.6” long pole-extension to keep the coil under control at high levels of excursion.
The voice coil is a 2.36” long / 3” diameter 4-layer aluminum winding / aluminum former unit – which is the same coil we use in our X v.2 series and, thus, the U series has the same 1500-watt RMS ratings. The coil temperature is kept in check by a heavily smoothed / high-velocity pole-vent and a series of ten direct air-gap vents in the back plate. The U series also features newly tooled cast aluminum vent rings in between the frame and top plate to effectively exchange air at a high velocity over the voice coil beneath the spider landing.
The U series features an all-new cast aluminum frame series to the Sundown line which allows for taller cones than the older frames used on the Z v.3 series. The taller cones provide enhanced coil stability and increased mechanical excursion capability. We also tooled matching cast-aluminum surround clamps for the U series to ensure durability in the most demanding situations. The surrounds and cone bodies have been fully custom tooled especially for the U series and are stronger / support more excursion than the Z v.3 series cones and surrounds. The new cone bodies also feature an indentation for the same wide-flange, ultra-strong dust caps as our new platform subwoofers.
If you are looking for a woofer that sounds similar to the SA series but handles significantly more power… the U series is exactly what you need. It has been designed to live up to the reputation earned by our Z v.3 series both in terms of every-day music enjoyment and SPL competition.
Features & Technology:
- Xmax = 30mm one-way by 70% BL
- RMS Power = 1500-watts
* Heavily vented magnetic gap
* Optimized high-velocity pole vent
* Innovative high-velocity vented frame spacer ring - Black Aluminum 3” voice coil former for superior heat dissipation
- High Temperature 4-Layer Round Wire Coil
- Large aluminum Faraday Ring (Magnet ID)
- Spring Loaded Terminals
- Stitched-On Double-XL Tinsel Leads to prevent fatigue and failure
- Bolted-On Surrounds
- Bolted-On 100% Nomex Spiders
- High-Strength Cast Aluminum Frame
- Optimized for small ported & band-pass enclosures”
Enclosure Specifications:
- Sealed Enclosure: 0.5 cu ft
- Ported Enclosure: 1.0 cu ft
- Recommended Tuning: 35Hz
- Recommended Port Area: 16 sq in
- Displacement: 0.21 cu ft
- Depth: 7.007"
- Outside Diameter: 10.94"
- Cut-Out: 9.17"
T/S SPECS | U 10″ D2 | U 10″ D4 |
RE (Ohms) | 3.8 | 6.1 |
FS (Hz) | 48.5 | 41.1 |
VAS (L) | 8.3 | 11.5 |
Qes | 0.35 | 0.39 |
Qms | 3.20 | 3.21 |
Qts | 0.32 | 0.35 |
Le (mH) | 2.56 | 3.71 |
BL (NA) | 26.8 | 29.7 |
Mms (Grams) | 216.3 | 219.7 |
Cms (uM/N) | 0.05 | 0.07 |
Sens (dB @ 1w/1m) | 86.2db | 84.9db |